Going for twin webers

Engine Oily Bits, Ignition, Fuelling, Cooling, Exhaust, etc.
Post Reply
Message
Author
GSouthee
Groupie
Groupie
Posts: 29
Joined: Wed Nov 08, 2017 9:20 am
Location: Hawkhurst Kent

Going for twin webers

#1 Post by GSouthee » Tue Jan 19, 2021 7:08 pm

Just ordered twin weber 32/36dgv setup for the 2.6 engine.

Should give me a few more horses.

Anyone gone this route?

G
1949 Ac saloon with 2.6 Triumph engine/gearbox.
1997 Chevy Astro tin top van
1955 AC saloon pickup project also to be Triumph powered.

A car is not an investment it is for driving and playing with :P

User avatar
valencia
Senior Member
Senior Member
Posts: 111
Joined: Fri Aug 19, 2005 11:56 pm
Location: Lancs

Re: Going for twin webers

#2 Post by valencia » Thu Jan 21, 2021 10:05 am

Hi, I have not so cannot comment but I was curious as to which manifold you will use, it sounds like an interesting conversion.
Michael.

wild bill
Senior Member
Senior Member
Posts: 533
Joined: Fri Jul 04, 2008 9:30 pm
Location: Kirkintilloch,nr.Glasgow.

Re: Going for twin webers

#3 Post by wild bill » Thu Jan 21, 2021 4:16 pm

G,
The carbs you are talking about are downdraft units, all the Six engines as far as I know run on sidedraft, whether injection, Strombergs, S.U.s ,HS4 or HS6.,and Webers,40,45,48 DCOE.
As Michael says, it will be interesting to see how they perform.For the size and tune you are talking about, have you considered a pair of downdraft 38DGAS or DGMS Webers.This 38 series delivers uniform fuel delivery's both chokes open together, as opposed to the 32/36 which opens "stepped",one choke ,then the other. Having used both 32/36 and 38 DGAS on an engine , the 38 DGAS wins hands down for power and delivery.MPG also not too different, depending on right foot!!!.Just a thought, do you have room for the extra height of the downdraft set up? Whichever you choose, please keep us all informed of your progress, good luck!
Bill.
Bill Young
1967 MK1 2000 MSS8E
1971 minivan IUI1588
1981 minivan TDS40W Now PMY453W
1962Greeves Sports Tourer 24DC 114 GGD
1998 Honda CB750, Deep Candy Apple Red.13500 Miles R191DVR
2020 Renault Trafic crew van 12 Miles 02-11-2020 TDS40W

GSouthee
Groupie
Groupie
Posts: 29
Joined: Wed Nov 08, 2017 9:20 am
Location: Hawkhurst Kent

Re: Going for twin webers

#4 Post by GSouthee » Thu Jan 21, 2021 7:09 pm

Hi Guys

Yes I did think about 38's but decided on the 32/36's for a more progressive application of fuel, also these are easy to alter the position the second choke to bring them in earlier, I did this on my Rover V8 with twin Dgv's.

I am using the pierce (USA) manifold adaptors, these are like those for the TR6 as sold by various suppliers ie scparts, webcon, aldon etc. However these are slightly shorter.

The TR6 ones do fit the 2500 saloon but I am told you may need to knock a clearance dimple in the inner wing. Luckily not a problem in my AC.

Here is a pic of engine bay with the SU's in place.

Cheers G
Attachments
DSCN1949.JPG
1949 Ac saloon with 2.6 Triumph engine/gearbox.
1997 Chevy Astro tin top van
1955 AC saloon pickup project also to be Triumph powered.

A car is not an investment it is for driving and playing with :P

GSouthee
Groupie
Groupie
Posts: 29
Joined: Wed Nov 08, 2017 9:20 am
Location: Hawkhurst Kent

Re: Going for twin webers

#5 Post by GSouthee » Thu Jan 28, 2021 5:27 pm

Hi guys

Well the weber's and manifolds ave arrived. Getting the manifold etch primed and coated in black. Hope to fit at weekend.

Will stick pic on her before and afyter.

Cheers Gary
1949 Ac saloon with 2.6 Triumph engine/gearbox.
1997 Chevy Astro tin top van
1955 AC saloon pickup project also to be Triumph powered.

A car is not an investment it is for driving and playing with :P

GSouthee
Groupie
Groupie
Posts: 29
Joined: Wed Nov 08, 2017 9:20 am
Location: Hawkhurst Kent

Re: Going for twin webers

#6 Post by GSouthee » Tue Feb 02, 2021 5:39 pm

Heres a pic or 2 of carbs fitted.

Just waiting for a couple of Webcon plenums to fit cold air pipes to.

Oh and Y piece for the fuel pipes then I'll start her up and fine tune carbs.

Gary
Attachments
DSCN2869.JPG
1949 Ac saloon with 2.6 Triumph engine/gearbox.
1997 Chevy Astro tin top van
1955 AC saloon pickup project also to be Triumph powered.

A car is not an investment it is for driving and playing with :P

GSouthee
Groupie
Groupie
Posts: 29
Joined: Wed Nov 08, 2017 9:20 am
Location: Hawkhurst Kent

Re: Going for twin webers

#7 Post by GSouthee » Tue Feb 02, 2021 5:40 pm

And here
Attachments
DSCN2868.JPG
1949 Ac saloon with 2.6 Triumph engine/gearbox.
1997 Chevy Astro tin top van
1955 AC saloon pickup project also to be Triumph powered.

A car is not an investment it is for driving and playing with :P

wild bill
Senior Member
Senior Member
Posts: 533
Joined: Fri Jul 04, 2008 9:30 pm
Location: Kirkintilloch,nr.Glasgow.

Re: Going for twin webers

#8 Post by wild bill » Fri Feb 05, 2021 8:57 pm

Gary, thanks for the pics, that looks great.I'll be very interested to find out how the car performs with that set up.Well done!

Regards,
Bill.
Bill Young
1967 MK1 2000 MSS8E
1971 minivan IUI1588
1981 minivan TDS40W Now PMY453W
1962Greeves Sports Tourer 24DC 114 GGD
1998 Honda CB750, Deep Candy Apple Red.13500 Miles R191DVR
2020 Renault Trafic crew van 12 Miles 02-11-2020 TDS40W

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests