Mk1 Pi Restoration

Show us the work you're doing on your Triumph 2000/2500/2.5.
Message
Author
Tinsmith_Skippy
Senior Member
Senior Member
Posts: 282
Joined: Tue Nov 19, 2013 8:50 pm
Location: North London

Re: Mk1 Pi Restoration

#41 Post by Tinsmith_Skippy » Tue Oct 13, 2020 6:30 pm

Hello all thanks for the comments. The car is now moving ahead, dad is working on it during the week and I'm chipping in on the weeknights and weekends.
Everything is ready to refit, there are some parts which have been sent away for chroming which could hold things up a little.

So far its going wheelie good, John you can have first dibs.

Image

The pipe work for the injection and brakes are installed

Image

Image

Image

The all important sound proofing needed a little attention. Where it was damaged I used household rockwool insulation and PVA glue, a bit Blue Peter but did the job in fact went over the whole thing with it and then a light coating of rubberised stone chip has bonded it together nicely.

Image
Last edited by Tinsmith_Skippy on Tue Oct 13, 2020 7:01 pm, edited 2 times in total.
Ross Taylor & Paul Taylor
Member: 7644 & 7644A

Tinsmith_Skippy
Senior Member
Senior Member
Posts: 282
Joined: Tue Nov 19, 2013 8:50 pm
Location: North London

Re: Mk1 Pi Restoration

#42 Post by Tinsmith_Skippy » Tue Oct 13, 2020 6:53 pm

The glass has been fitted with the rear glass fitted with a new old stock rubber, worth the money when they come up for sale, the pattern ones fit but cant seem to get the bottom right. Bit of a mare with the drivers door glass, it is scratched big time I've got a spare but it has another cars REG etched on it doh! Really good condition as well, maybe a strategic triplex sticker placement is required or may have to look for another one.

Image

Had to keep the period Goldenlay Eggs and this car has been Supertuned by a company in Gwent window stickers.

Not worried about keeping the badges for the crowning glory item, if I've found the part might as well put it on, if I put it down it might take a couple of hours to find it again.

Image

That's about where were up too. Hope everyone is well.

Image
Ross Taylor & Paul Taylor
Member: 7644 & 7644A

johnnydog
Senior Member
Senior Member
Posts: 1178
Joined: Tue May 14, 2013 12:33 pm
Location: Lancashire

Re: Mk1 Pi Restoration

#43 Post by johnnydog » Wed Oct 14, 2020 12:07 am

It does look 'wheelie' good Ross - in fact 'wheelie wheelie' good...!! I am quietly away quite jealous; very envious that you have a superb looking Mk1 PI in what has to be the best colour.... Insanely jealous in fact..... but well done Ross and Paul! Look forward to possibly seeing it at next year's National (?) and then driving it home (?!?) 😂 :lol: 👍
Register Member no. 1596

1967 Mk1 2000 in Gunmetal Grey
1969 Mk1 2000 in Royal Blue
1970 Mk2 2000 in Valencia Blue
1972 Mk2 2.5 PI in Triumph White
1973 Mk2 2.5 PI in Sienna Brown
1976 Mk2 2500S in Carmine Red

Tinsmith_Skippy
Senior Member
Senior Member
Posts: 282
Joined: Tue Nov 19, 2013 8:50 pm
Location: North London

Re: Mk1 Pi Restoration

#44 Post by Tinsmith_Skippy » Fri Oct 23, 2020 8:10 am

Hello all another update. Were plodding along nicely. The bulkhead items are now fitted along with the windscreen with sealant applied around the rubber, I'll fit the trim when its on its wheels as I cant reach round it.

Image
The rear suspension next update.

Image
Ross Taylor & Paul Taylor
Member: 7644 & 7644A

User avatar
Phil T
Groupie
Groupie
Posts: 78
Joined: Wed Aug 13, 2014 3:55 pm

Re: Mk1 Pi Restoration

#45 Post by Phil T » Fri Oct 23, 2020 8:37 am

That looks terrific.

Tinsmith_Skippy
Senior Member
Senior Member
Posts: 282
Joined: Tue Nov 19, 2013 8:50 pm
Location: North London

Re: Mk1 Pi Restoration

#46 Post by Tinsmith_Skippy » Wed Oct 28, 2020 8:07 pm

Thanks for the comments Phil. Here is another update as the rear suspension is now installed

Image
Last couple of evenings we have installed the new clutch and mounted the gearbox to the engine along with a few other odds and ends ready to reinstall it back in the car over the weekend.

Image

Image
Ross Taylor & Paul Taylor
Member: 7644 & 7644A

Tinsmith_Skippy
Senior Member
Senior Member
Posts: 282
Joined: Tue Nov 19, 2013 8:50 pm
Location: North London

Re: Mk1 Pi Restoration

#47 Post by Tinsmith_Skippy » Thu Oct 29, 2020 8:15 pm

A cheeky day working on the Pi.

Image

Image
Ross Taylor & Paul Taylor
Member: 7644 & 7644A

johnnydog
Senior Member
Senior Member
Posts: 1178
Joined: Tue May 14, 2013 12:33 pm
Location: Lancashire

Re: Mk1 Pi Restoration

#48 Post by johnnydog » Thu Oct 29, 2020 10:09 pm

Looking good Ross - however, I wouldn't have expected anything less!
I see you have a set of Maxxis tyres - I managed to get a set last year of 185 80 13 for my PI, and I think they are a very good tyre for the price, but they had a thin white wall band. It wasn't really a problem, as they could be fitted either way round, so I got the tyre place to put the white wall on the inside. Have you got some without white walls then Ross?
Register Member no. 1596

1967 Mk1 2000 in Gunmetal Grey
1969 Mk1 2000 in Royal Blue
1970 Mk2 2000 in Valencia Blue
1972 Mk2 2.5 PI in Triumph White
1973 Mk2 2.5 PI in Sienna Brown
1976 Mk2 2500S in Carmine Red

Tinsmith_Skippy
Senior Member
Senior Member
Posts: 282
Joined: Tue Nov 19, 2013 8:50 pm
Location: North London

Re: Mk1 Pi Restoration

#49 Post by Tinsmith_Skippy » Thu Oct 29, 2020 10:55 pm

Hello 👋 John we went for these, as you say reasonably priced compared to the Michelin XAS FF. Very limited choice for the 13 inch rim. The Maxxis are fitted to dads french blue car with the white wall facing inwards. However gone a little off piste with whitewalls showing on mk1, think It might look quite cool 😎 if it doesn’t I’ll have to change it. However they are blue at the moment as this is a protective layer. Hope your well, dad said he will throw in the rubber mats to sweeten the deal.
Ross Taylor & Paul Taylor
Member: 7644 & 7644A

dave.w
Newbie
Newbie
Posts: 9
Joined: Sat Oct 31, 2009 1:58 pm
Location: Gloucestershire

Re: Mk1 Pi Restoration

#50 Post by dave.w » Thu Nov 12, 2020 6:51 pm

Hi Ross, looking fantastic, quality workmanship and attention to detail, as usual,! Hoping to see it at next years National, fingers crossed!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest