Triumph show and spares day

Message

#1 Post by **dallliiisss** » Wed Feb 06, 2008 7:02 am

Hello to all,
Is there a 2000 register club stand at the Triumph show and spares day at stoneleigh on the 10th of feb?
I\'ll be going along for sure.

#2 Post by **Alan Chatterton** » Wed Feb 06, 2008 4:53 pm

Yes, there will be one...........
Hope to see you there, I\'ll be going and depending on the weather I\'ll either be there in the Stag or the PI.............
 

French rep · #3 Post by **French rep** » Wed Feb 06, 2008 6:39 pm

 <IMG>  I will be there too, from Saturday, to help Alan on the club stand.
Not with one of my Triumph, unfortunatly, because I need to bring back a lot of spare parts to France.
Meaning that, if a Register member has a good (no rust, nor damages)Mk2 boot lid in his \"shed\", please bring this to Stoneleigh, thanks, as I need one for my next 2500 Mk2 project <IMG>.
Cheers,
Chris,
register French Representative.
 
 

#4 Post by **Poole_A** » Wed Feb 06, 2008 6:49 pm

Chris,
I have a good lid of the type with two number plate lights if that is what you are after ?

French rep · #5 Post by **French rep** » Wed Feb 06, 2008 8:59 pm

Hi Poole,
Thanks for your reply.
Mine as a hole for a rectangular number plate light : I don\'t know if I can use yours ?
I will look on my old rusty one and try to understand where is the difference.
Cheers,
Chris.

#6 Post by **Alan Chatterton** » Wed Feb 06, 2008 9:40 pm

Two different bootl lids.
Early MKII had one hole for one large chrome number plate lamp
Later ones have two smaller holes for twin recessed plastic lights.
You can convert a two hole to a one hole by cutting away the centre bit, the other way round is harder..........

French rep · #7 Post by **French rep** » Wed Feb 06, 2008 11:24 pm

<IMG><IMG>
Excellent, Allan !
I have check on my boot lid, there is a big rectangular hole for the lamp, you are absolutly right.
Why not use Poole\' boot lid if it\'s possible <IMG>
Please tell me how much you want for this (MP please), or if you prefer, I can bring something (bottle of a french beverage  <IMG> ? )  to you, from France at Stoneleigh <IMG>
Cheers,
Chris.

#8 Post by **sahtuning2000** » Thu Feb 07, 2008 1:07 am

I still need a mk1 2000 white faced speedo in KPH French rep,any chance by Sunday???

French rep · #9 Post by **French rep** » Thu Feb 07, 2008 1:38 am

No Chance, unfortunatly, as most of my spares parts have been destroyed with the water and mud flood in june, last year.
I will keep an eye open for this, you may be lucky !

#10 Post by **sahtuning2000** » Thu Feb 07, 2008 2:58 am

Cheers!!!