Rear end shunts and the hunt for an Outer Valance
-
Julian B 1972
- Groupie

- Posts: 41
- Joined: Tue Nov 18, 2008 1:04 pm
Rear end shunts and the hunt for an Outer Valance
Hi,
Usually I'm here posting a minor/naive question to those much more knowledgeable, but sadly a couple of weeks ago my MK2 2000 received a rear shunt. Nobody hurt, (my five year old was asleep in the seat beside me and didn't even realise it had happened) and entirely the other parties fault, and all admitted by the third party so this all is at least a blessing.
The car however took quite a clout but is entirely repairable and will need quite a few replacement parts - rear bumper, light panel a lower valance etc. Prior to the accident the car was, whilst not concours, very good so I'm hopeful that the cars value will cover the cost of works required.
So at present am working with my local garage to source parts /prices to give to my insurers.
The biggest obstacle is sourcing the outer rear valance. Earlpart quote this item (£344), my garage has spoken to them this week, and they have the tooling to remanufacture the item, but no stock at present. This is as near as we have got, all the other usual suspects Rimmers, Chris Witor, Canley etc, have drawn a blank.
Whilst there is still quite a long journey before the car is back on the road the rear valance is the first big obstacle. So any thoughts? Anyone got one stuffed away in a shed?
Thats all for now, probably more questions as I try to get this resolved.
Julian
Usually I'm here posting a minor/naive question to those much more knowledgeable, but sadly a couple of weeks ago my MK2 2000 received a rear shunt. Nobody hurt, (my five year old was asleep in the seat beside me and didn't even realise it had happened) and entirely the other parties fault, and all admitted by the third party so this all is at least a blessing.
The car however took quite a clout but is entirely repairable and will need quite a few replacement parts - rear bumper, light panel a lower valance etc. Prior to the accident the car was, whilst not concours, very good so I'm hopeful that the cars value will cover the cost of works required.
So at present am working with my local garage to source parts /prices to give to my insurers.
The biggest obstacle is sourcing the outer rear valance. Earlpart quote this item (£344), my garage has spoken to them this week, and they have the tooling to remanufacture the item, but no stock at present. This is as near as we have got, all the other usual suspects Rimmers, Chris Witor, Canley etc, have drawn a blank.
Whilst there is still quite a long journey before the car is back on the road the rear valance is the first big obstacle. So any thoughts? Anyone got one stuffed away in a shed?
Thats all for now, probably more questions as I try to get this resolved.
Julian
Re: Rear end shunts and the hunt for an Outer Valance
im not the best person to reply!! but any pictures of the damage,,,can the damaged panel be knocked out,and patch repaired to high standed....but yeah,,panel for these car are rare hugely costly
- TedTaylor
- Senior Member

- Posts: 1670
- Joined: Sat Dec 06, 2008 11:27 pm
- Location: Forest of Dean (Gloucestershire)
Re: Rear end shunts and the hunt for an Outer Valance
The usual story ......!Julian B 1972 wrote: Earlpart quote this item (£344), my garage has spoken to them this week, and they have the tooling to remanufacture the item, but no stock at present.
Keep an eye open on ebay etc., or this Forum request may come up with one. If not you may have to resort to getting a good one taken off a scrapper.
Ted
Member 4473 1990
1964 2000 period rally look alike AFH 849B
Morris 1800 London-Sydney/Monte/WCR NAM 616G
Mk1 PI Estate SCG 115G
2500 Estate WDE 76K RBRR 2014
1964 2000 period rally look alike AFH 849B
Morris 1800 London-Sydney/Monte/WCR NAM 616G
Mk1 PI Estate SCG 115G
2500 Estate WDE 76K RBRR 2014
Re: Rear end shunts and the hunt for an Outer Valance
scrapper,,,i thought we were dead against scrapping big triumph,come to that any triumphTedTaylor wrote:The usual story ......!Julian B 1972 wrote: Earlpart quote this item (£344), my garage has spoken to them this week, and they have the tooling to remanufacture the item, but no stock at present.Will never get made - why do you think LLoyd has had to go to the trouble of investigating having wing repair sections made.
Keep an eye open on ebay etc., or this Forum request may come up with one. If not you may have to resort to getting a good one taken off a scrapper.
Ted
- TedTaylor
- Senior Member

- Posts: 1670
- Joined: Sat Dec 06, 2008 11:27 pm
- Location: Forest of Dean (Gloucestershire)
Re: Rear end shunts and the hunt for an Outer Valance
There are 'end of life' cars around which it is impossible/not viable to save.iwontone wrote:scrapper,,,i thought we were dead against scrapping big triumph,come to that any triumphTedTaylor wrote:The usual story ......!Julian B 1972 wrote: Earlpart quote this item (£344), my garage has spoken to them this week, and they have the tooling to remanufacture the item, but no stock at present.Will never get made - why do you think LLoyd has had to go to the trouble of investigating having wing repair sections made.
Keep an eye open on ebay etc., or this Forum request may come up with one. If not you may have to resort to getting a good one taken off a scrapper.
Ted
Member 4473 1990
1964 2000 period rally look alike AFH 849B
Morris 1800 London-Sydney/Monte/WCR NAM 616G
Mk1 PI Estate SCG 115G
2500 Estate WDE 76K RBRR 2014
1964 2000 period rally look alike AFH 849B
Morris 1800 London-Sydney/Monte/WCR NAM 616G
Mk1 PI Estate SCG 115G
2500 Estate WDE 76K RBRR 2014
- leesellars
- Senior Member

- Posts: 391
- Joined: Sat Aug 13, 2011 5:34 pm
- Location: Nottingham
Re: Rear end shunts and the hunt for an Outer Valance
I have both of those panels in stock. Perhaps Lloyd could get these made aswell.
Lee
Lee
Triumph Mk2 PI 1975
Triumph TR6 PI 1973
Triumph TR6 PI 1973
-
andyborris
- Senior Member

- Posts: 558
- Joined: Wed Jul 22, 2009 8:39 pm
Re: Rear end shunts and the hunt for an Outer Valance
And don't forget, even if the insurance company write the car off, you can keep the salvage and receive a reduced payment instead.
Re: Rear end shunts and the hunt for an Outer Valance
[/quote]There are 'end of life' cars around which it is impossible/not viable to save.[/quote]
i fear that my estate a `end of life car` so much of saving rare ones
i fear that my estate a `end of life car` so much of saving rare ones
- TedTaylor
- Senior Member

- Posts: 1670
- Joined: Sat Dec 06, 2008 11:27 pm
- Location: Forest of Dean (Gloucestershire)
Re: Rear end shunts and the hunt for an Outer Valance
There are 'end of life' cars around which it is impossible/not viable to save.[/quote]iwontone wrote:
i fear that my estate a `end of life car` so much of saving rare ones[/quote]
Your car is most certainly not and 'end of life' car and considering it is a rare early estate it has to be worth £700 or offers in my opinion, and that would be without the repair sections. Lloyd though it was worth this and it is unfortunate that his sudden change in circumstances forced him to have to give up on the deal.
An 'end of life' car is one that is seriously rotten which from your pictures yours most certainly is not. If your car is not worth saving I am afraid that we should give up on the idea of the SOT (Save our Triumphs).
Ted
Member 4473 1990
1964 2000 period rally look alike AFH 849B
Morris 1800 London-Sydney/Monte/WCR NAM 616G
Mk1 PI Estate SCG 115G
2500 Estate WDE 76K RBRR 2014
1964 2000 period rally look alike AFH 849B
Morris 1800 London-Sydney/Monte/WCR NAM 616G
Mk1 PI Estate SCG 115G
2500 Estate WDE 76K RBRR 2014
-
Lloydpiestate
- Senior Member

- Posts: 492
- Joined: Thu Jan 01, 1970 12:33 am
- Location: cardiff
Re: Rear end shunts and the hunt for an Outer Valance
hi julian,
sorry to hear about your woes and glad it was nothing more serious as your daughter was in the car !!
i am looking into getting these panels done, as i do intend to be able to supply all panels that us t2000 owners need, and as they are rear sections that do take a bang now and again, there is a possible market for them.
i"ll have a word with lee and see what we can do, although the complexity of the light panel may deem it financially unviable
lloyd
sorry to hear about your woes and glad it was nothing more serious as your daughter was in the car !!
i am looking into getting these panels done, as i do intend to be able to supply all panels that us t2000 owners need, and as they are rear sections that do take a bang now and again, there is a possible market for them.
i"ll have a word with lee and see what we can do, although the complexity of the light panel may deem it financially unviable
lloyd