The Triumph 2000 / 2500 / 2·5 Register Forum

Anyone know what the towing capacity is of a 2.5 pi manual overdrive I know that you shouldn’t exceed 85% of the. Kerb weight of the car. I’ve got a 600 kg caravan it tows it ok but I want to get something a bit bigger maybe up to 900 kg.

Anyone know what the towing capacity is of a 2.5 pi manual overdrive I know that you shouldn’t exceed 85% of the. Kerb weight of the car. I’ve got a 600 kg caravan it tows it ok but I want to get something a bit bigger maybe up to 900 kg.

Wanted Towbar for 1973 PI preferably with electrics

If you can afford it might be an idea to convert to electric power steering I’m having my Pi done end of April
£1500 by easy steer in Chorley Lancashire. I’ve spent thousands on it so far so another £1500 won’t make much difference new cv driveshafts, reconditioned manual steering rack all new ...

I’m thinking of putting the original wheels and trims back on my PI.
I am going to repaint the black inserts on the trims (masking and spraying them) what I want to know is were they originally Matt or gloss black.

I sympathise with your Issue I think I put the left hand side in first then the right side helped if you tip it up at roughly at 45 degrees. The worst bit I found was putting the small bolts in that secure the parcel shelf to the deflector for the heater. I also put some duck tape or a bit of rag on ...

Thank you Johnnydog that clears that one up most of that £10000 is labour they want to cut out and replace a new piece of metal on both sides of the subframe (the mounts under the rear seat can’t think what you call them) the near side one has been welded before and they have said it is a poor weld ...

Hello all having a load of work on my pi done £10000 worth !! New struts,welding, diff bolts ( the ones that the diff is bolted to), new springs,new shockers, new steering rack, brake pipes, wheel cylinders , and overhaul on front callipers, new cv driveshafts, etc etc.
What I want to know is are ...

I have now managed to get 3 and 4 injectors spraying however they are dribbling so am going to get a couple of new injectors and get the old ones refurbished

Hi all replaced the nylon fuel injector pipes with new ones as one of the old ones had a crack in it although it was not leaking fuel so I thought I would replace them all.

Got engine started but number 2 was not spraying managed to get it spraying after pulling the needle out with some long nose ...