The Triumph 2000 / 2500 / 2·5 Register Forum

 Hi has any body got a tow bar for mk2 saloon 2000, for sale. The one I whould like is the sningle bar that bolts through the boot floor, not at the bumber eyes. dont need the ball or wiring, I only need to pull light weight trailer, so if you have one I would be grateful.
Pete

Hi Gavin, A good way to find the leak, is to give it a good clean then dry it, then put/tip talcum powder around the engine. Run it up and down the road give it a rev, leave it on tick over for 30 mins and you should see were the oil is coming from, thats what I did.&nbsp; <IMG>
Pete&nbsp;

&nbsp; Hi Gavin, just had the same thing with mine, I found that there is an oil feed/ well at the back of the head. The head gasket had fractured and the oil was leaking from there down the back and the side of the engine,it leak\'s outwards not inwards so there&nbsp;are no symptom\'s of the head ...

&nbsp;Hi charles & Dizzy took your veiws, and put an oil gauge on to see what the diff would be, and there is not a lot in it. It did not make that much diff with the feed on or off, so I left it on at the moment, becouse on start up I get no knocking at all. Every one say\'s that it dose sound good ...

Hi all, big up date on the head rebuild and refit<IMG>&nbsp;put it all back together 6-3-1 semi sport C/W exhaust, ally rockercover, head oil feed for the rockers, looks so sweet under there. BUT fired frist turn of the key, new points, condenser,dizy cap, plugs, leads, sounded sweet, warmed up on ...

hi give it ago, and thay did not ask for NCB, thay did ask if I used anther car some times !!!
&nbsp;
Pete

&nbsp;hi Trevan that would be one&nbsp;big boneus

Hi all just to give you an update, got head back today top job, will try and put it all back on the week end, Have been pulling my hair out looking on here and on club triumph, every one gose on about C/W exhaust. So gone and done it. 6-3-1 extractor and semi sport should be well sweet, but getting ...

Hi Charles,
&nbsp; done it&nbsp; spot on, a good chisel took about 5mins, thanks
&nbsp;
Pete

Hi Charles H,
&nbsp; I will give that a go, Thanks.
&nbsp;
Pete<IMG>