It is currently Fri Sep 22, 2017 4:28 am

All times are UTC




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Battery recommendations?
PostPosted: Sat Apr 15, 2017 4:19 pm 
Offline
Groupie
Groupie

Joined: Sat Jul 03, 2010 7:37 pm
Posts: 84
Location: Yorks/Lancs border
Probably been asked before but the only thread I could find with the search was from many eyars ago now.

What do people recommend? I want one where the poles are in the right place, that is, next to the inner wing positive at the front of the engine.

Mine's a mark 2 2000 and I am happy to go for more than the minimum needed in cranking power etc

_________________
1969 Mk2 2000 Saloon in Valencia
1977 TR7 16V tarmac rally car - works colours
1982 TR7 DHC - Cavalry Blue
1992 Rover 214i - White Diamond
1992 Mini Mayfair - Red (Mrs R's)
My blog - http://raidertr7.blogspot.com/


Last edited by Raider on Sat Apr 15, 2017 5:35 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Sat Apr 15, 2017 4:56 pm 
Offline
Groupie
Groupie

Joined: Sat Jul 03, 2010 7:37 pm
Posts: 84
Location: Yorks/Lancs border
Tried another search and the recommendation seemsto be 096R :)

_________________
1969 Mk2 2000 Saloon in Valencia
1977 TR7 16V tarmac rally car - works colours
1982 TR7 DHC - Cavalry Blue
1992 Rover 214i - White Diamond
1992 Mini Mayfair - Red (Mrs R's)
My blog - http://raidertr7.blogspot.com/


Top
 Profile  
 
PostPosted: Mon Apr 17, 2017 6:50 am 
Offline
Senior Member
Senior Member

Joined: Fri Mar 19, 2004 3:50 pm
Posts: 705
Location: United Kingdom
Mine's the other way round - positive at the back close to the starter solenoid, negative at the front close to the engine earthing point.
But terminals definitely near to the wing.

In general I think it's always better to get the biggest battery that will fit in the space and that the clamp will hold.


Top
 Profile  
 
PostPosted: Mon Apr 17, 2017 4:09 pm 
Offline
Groupie
Groupie

Joined: Sat Jul 03, 2010 7:37 pm
Posts: 84
Location: Yorks/Lancs border
The earth mounting point on the engine on mine is between the distributor and the ballast resistor.

The power cable runs along the engine subframe and then abck down the offside of the engine to the starter.

So, it's logical the positive is at the front and negative at the back. No reason why the wiring shouldn't be different on different cars though but it does affect the battery because of where the terminals are.

Well I have bought a Lucas branded 096R so it should look right and it should fit too if my measurements are anything like right. :?

_________________
1969 Mk2 2000 Saloon in Valencia
1977 TR7 16V tarmac rally car - works colours
1982 TR7 DHC - Cavalry Blue
1992 Rover 214i - White Diamond
1992 Mini Mayfair - Red (Mrs R's)
My blog - http://raidertr7.blogspot.com/


Top
 Profile  
 
PostPosted: Mon Apr 17, 2017 7:41 pm 
Offline
Site Admin
Site Admin

Joined: Mon May 08, 2006 9:50 pm
Posts: 3356
Location: South Oxfordshire, UK
I think it was me who originally posted about a 96R battery. I spent some time looking at the various sizes and came across a 96, but it had the terminals round the wrong way! Luckily the 96R (R for reversed maybe?) fitted the bill and has done very well since, even after occasionally going flat!

It fits the early Mk2 very well, but the later Mk2 cars (with the engine moved to the left a bit) have a smaller battery tray and I'm not sure it will fit there.

Mine's a 1971 car and it's fine in that so should be OK in your 1969 2000.

One thing I would recommend is to fit 2 new high-current cables direct from the alternator to the battery, one for Positive and the other for Negative. This gives a lower resistive path between the alternator and battery and that will help to keep the battery better charged. The negative cable might sound a bit odd, but the currents from the alternator can be very high and when you think about all those slightly dirty metal to metal contacts a new cable makes good sense.

Cheers,
Mike.

_________________
(South Oxfordshire)
Register Member No 0355
1967 Herald 1200 Convertible rust should be white
1971 2.5PI Saloon Sapphire blue
1973 2.5PI Saloon rust some Honeysuckle
1973 Stag French blue
(1949 LandRover was blue should be light green!)


Top
 Profile  
 
PostPosted: Tue Apr 18, 2017 5:24 am 
Offline
Senior Member
Senior Member

Joined: Sun Jun 14, 2009 5:35 am
Posts: 687
Location: New Zealand
Mike,
Interested in your comments. Where would you put the earth cable on the alternator ?
Tony.

_________________
1976 2500 TC.

Lots of bits

1999 BMW Z3.
2003 BMW 525i Touring.
Hopefully not needing too many bits.




.
Hopefully don't need bits !


Top
 Profile  
 
PostPosted: Thu Apr 20, 2017 9:47 pm 
Offline
Site Admin
Site Admin

Joined: Mon May 08, 2006 9:50 pm
Posts: 3356
Location: South Oxfordshire, UK
Hi Tony,

Mine's not got an original alternator (an uprated one when I bought the car). I fitted it to one of the mounting bolts/studs. It just helps to lower the loop resistance between battery and alternator.

Cheers,
Mike.

_________________
(South Oxfordshire)
Register Member No 0355
1967 Herald 1200 Convertible rust should be white
1971 2.5PI Saloon Sapphire blue
1973 2.5PI Saloon rust some Honeysuckle
1973 Stag French blue
(1949 LandRover was blue should be light green!)


Top
 Profile  
 
PostPosted: Fri Apr 21, 2017 2:17 am 
Offline
Senior Member
Senior Member

Joined: Sun Jun 14, 2009 5:35 am
Posts: 687
Location: New Zealand
Thanks Mike, will have a look at mine.
Tony.

_________________
1976 2500 TC.

Lots of bits

1999 BMW Z3.
2003 BMW 525i Touring.
Hopefully not needing too many bits.




.
Hopefully don't need bits !


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group