HS6 rebuilds,things to do and don,t?
Sounds like waxstat set up to me, with the clip. Can you post a pic ?
Tony.
Tony.
1976 2500 TC. converted to S specs.
Lots of bits
1999 BMW Z3.
2006 BMW 325ti.
Hopefully not needing too many bits.
.
Lots of bits
1999 BMW Z3.
2006 BMW 325ti.
Hopefully not needing too many bits.
.
-
- Senior Member
- Posts:944
- Joined:Fri Mar 19, 2004 3:50 pm
- Location:United Kingdom
Re: HS6 rebuilds,things to do and don,t?
Could it be a converted ex-waxstat, using penny washers?
Re: HS6 rebuilds,things to do and don,t?
Very easy to tell the difference between standard jets and wax stats - the standard jets have red tips, and the wax stats look like a top hat upside down
Register Member no. 1596
1967 Mk1 2000 in Gunmetal Grey
1969 Mk1 2000 in Royal Blue
1970 Mk2 2000 in Valencia Blue
1972 Mk2 2.5 PI in Triumph White
1973 Mk2 2.5 PI in Sienna Brown
1976 Mk2 2500S in Carmine Red
1967 Mk1 2000 in Gunmetal Grey
1969 Mk1 2000 in Royal Blue
1970 Mk2 2000 in Valencia Blue
1972 Mk2 2.5 PI in Triumph White
1973 Mk2 2.5 PI in Sienna Brown
1976 Mk2 2500S in Carmine Red
-
- Senior Member
- Posts:484
- Joined:Thu Apr 08, 2004 7:46 pm
- Location:United Kingdom
Re: HS6 rebuilds,things to do and don,t?
All rebuilt with new parts and the jets are normal ones,hopefully i get a chance to refit them tommorrow and fingers crossed it all runs fine,got all new breather hoses to fit aswell.
Fitted standard flat throttle discs and BFZ needles,new jets,float valves etc and all seems good,the test will be if it starts!
I set the jets at level with the bridge and turned down 2 whole turns on etc carb,so that should be a base to start.
Fitted standard flat throttle discs and BFZ needles,new jets,float valves etc and all seems good,the test will be if it starts!
I set the jets at level with the bridge and turned down 2 whole turns on etc carb,so that should be a base to start.
- TedTaylor
- Senior Member
- Posts:1670
- Joined:Sat Dec 06, 2008 11:27 pm
- Location:Forest of Dean (Gloucestershire)
Re: HS6 rebuilds,things to do and don,t?
Thanks for the update - good luck tomorrow!
MUT
MUT
Member 4473 1990
1964 2000 period rally look alike AFH 849B
Morris 1800 London-Sydney/Monte/WCR NAM 616G
Mk1 PI Estate SCG 115G
2500 Estate WDE 76K RBRR 2014
1964 2000 period rally look alike AFH 849B
Morris 1800 London-Sydney/Monte/WCR NAM 616G
Mk1 PI Estate SCG 115G
2500 Estate WDE 76K RBRR 2014
Re: HS6 rebuilds,things to do and don,t?
the reason for using atf in the carb dashpots is that the "viscosity" remains the same no matter what the temp is under the bonnet, so giving a more consistant amount of resistance to lift, unlike oil.
hope this info is of some help
hope this info is of some help
- David Withers
- Senior Member
- Posts:1230
- Joined:Tue Mar 22, 2005 11:28 am
- Location:North Cambridgeshire, UK
- Contact:
Re: HS6 rebuilds,things to do and don,t?
I found it difficult to understand why an ATF wouldn't change viscosity with change of temperature so did a bit of browsing...racer wrote:the reason for using atf in the carb dashpots is that the "viscosity" remains the same no matter what the temp is under the bonnet, so giving a more consistant amount of resistance to lift, unlike oil.
hope this info is of some help
From Mobil's data sheet for their Delvac Synthetic ATF:
Viscosity, ASTM D 445
cSt @ 40º C 39
cSt @ 100º C 7.3
From Redline's data sheet for their Racing ATF:
Vis @ 100°C, cSt 10
Vis @ 40°C, cSt 53.7
I've never had a problem using engine oil in my 55 years experience with SU carburettors, whether it be the straight 30 that they specified before the days of multigrade oil or the 20W/50 specified in later years. I experimented with alternatives back in the days when I wanted to get faster acceleration from whatever car I had at the time, but none seemed to work as well as the correct engine oil.
-
- Senior Member
- Posts:484
- Joined:Thu Apr 08, 2004 7:46 pm
- Location:United Kingdom
Re: HS6 rebuilds,things to do and don,t?
Fitted the carbs today and it started up perfectly and ran lovely on fast idle with choke out and after a couple of minor adjustments it ran spot on,really pleased,BUT then it wouldn,t start,read my new post!
-
- Senior Member
- Posts:944
- Joined:Fri Mar 19, 2004 3:50 pm
- Location:United Kingdom
Re: HS6 rebuilds,things to do and don,t?
David Withers wrote:racer wrote:
I found it difficult to understand why an ATF wouldn't change viscosity with change of temperature
Even multigrade oil still gets thinner with temperature, just not as much so as a straight oil would.
Is there actually any liquid that doesn't get thinner with temperature? Molten sugar perhaps, as it turns into jam?
Re: HS6 rebuilds,things to do and don,t?
Dave, thanks for clarifying the ATF characteristics; even if only a couple of bods race. Do you know if earlier ATF formulations were based on mineral? I've always used SAE30 (which is still readily available - lawn mowers and the like) but have used 20w50 also.David Withers wrote:I found it difficult to understand why an ATF wouldn't change viscosity with change of temperature so did a bit of browsing...racer wrote:the reason for using atf in the carb dashpots is that the "viscosity" remains the same no matter what the temp is under the bonnet, so giving a more consistant amount of resistance to lift, unlike oil.
hope this info is of some help
From Mobil's data sheet for their Delvac Synthetic ATF:
Viscosity, ASTM D 445
cSt @ 40º C 39
cSt @ 100º C 7.3
From Redline's data sheet for their Racing ATF:
Vis @ 100°C, cSt 10
Vis @ 40°C, cSt 53.7
I've never had a problem using engine oil in my 55 years experience with SU carburettors, whether it be the straight 30 that they specified before the days of multigrade oil or the 20W/50 specified in later years. I experimented with alternatives back in the days when I wanted to get faster acceleration from whatever car I had at the time, but none seemed to work as well as the correct engine oil.
Kev
Who is online
Users browsing this forum: No registered users and 25 guests