Replacement floorpan

Bodywork, interior and exterior trim and glass, bumpers, etc.
Post Reply
Message
Author
Carboy0
Senior Member
Senior Member
Posts: 190
Joined: Wed Oct 24, 2018 12:09 pm

Replacement floorpan

#1 Post by Carboy0 » Mon Sep 23, 2019 6:38 pm

We’ve been checking around the bodywork for rust on found plenty - of course. The passenger footwell has rotted out at the base of the bulkhead. My question is whether there is a panel available to be welded in or do we need to fabricate something?

All advice welcome
9469D339-DFBF-4CCB-B230-20494FD47CA3.jpeg
Chris

Member 7910
Saffron 2000 TC Man O/D - actually 2500 TC Man O/D - bit of a project.
Magenta Stag 3.0 Man O/D

User avatar
Dave B
Senior Member
Senior Member
Posts: 948
Joined: Thu Dec 27, 2007 8:37 pm
Location: Wigan,Home of the mighty Warriors

Re: Replacement floorpan

#2 Post by Dave B » Mon Sep 23, 2019 10:02 pm

Cheaper (and easier) than making your own!
https://southwalestriumphs.com/?s=floor ... pe=product
Lloyd is doing sterling work reproducing previously unobtainable panels/repair sections.
Thankfully neither of my two need any yet, but I would go here first if they did.
Club Member 2035
1970 2500 Mk2 in pimento red
1972 2000 Mk2 in sapphire blue
Vauxhall Vectra C Design lpg
Toyota Avensis TR

Carboy0
Senior Member
Senior Member
Posts: 190
Joined: Wed Oct 24, 2018 12:09 pm

Re: Replacement floorpan

#3 Post by Carboy0 » Wed Sep 25, 2019 4:50 pm

Thanks Dave, a lot of the rust is in the more upright bulkhead section, where it joins the floor pan, I don’t suppose there’s a panel for that as well?
Chris

Member 7910
Saffron 2000 TC Man O/D - actually 2500 TC Man O/D - bit of a project.
Magenta Stag 3.0 Man O/D

Lloydpiestate
Senior Member
Senior Member
Posts: 492
Joined: Thu Jan 01, 1970 12:33 am
Location: cardiff

Re: Replacement floorpan

#4 Post by Lloydpiestate » Wed Oct 30, 2019 10:21 am

the panel you require will be pressed next year, i have just managed to obtain this NOS one for use as a pattern, the o/s will be pressed and the n/s will be fabricated, unless i can find a NOS n/s in the meantime.

i might press the whole panel or just 15" from the bottom upward, the price i am waiting on will dictate

lloyd
IMG_20191028_171949.jpg

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest