Page 4 of 11
Re: panel remanufacture 2015
Posted: Sat Mar 21, 2015 10:03 am
by Steve G
Mk2 Half Wing.
Mk2 Wheel Arch Repair Panel
Re: panel remanufacture 2015
Posted: Sat Mar 28, 2015 9:13 am
by Lloydpiestate
hi all,
the order will be placed with the manufacturer at the end of next week ( 3rd april 2015 ), so anymore for anymore please ensure i have your order form and payment with me by the latest thursday ( 2nd april 2015 ), thank you.
PLEASE NOTE THAT SILL CENTRE REPAIR PANEL LR13 IS NOT WHAT I ASKED MANUFACTURER TO PRICE FOR, ALTHOUGH A USEFULL PANEL TO SOME, AND I WILL CONTINUE TO PRODUCE IT, THE CENTRE SILL REPAIR WAS TO CONTAIN THE BOTTOM RETURN INC DRAIN HOLES, AND I WILL BE GETTING A PRICE FOR THIS PROFILE OF THE CENTRE. ( THE PIC IS UPSIDE DOWN BY THE WAY )
ALSO LR21 OUTER SILL REPAIR WAS MENT TO CONTAIN A ONE INCH TOP RETURN, SO AGAIN I WILL GET A PRICE FOR THIS.
i will be taking another trip to the manufacturers in 2 weeks time, to drop off the other side mk2 front and get a price on front outer arch bowls full and repair, floorpans and jacking points, I STILL NEED MK1 AND 2 OUTER REAR BOWLS ANYONE GOT ANY ??????
all refunds for those that are due, because of the decrease in cost of the mk2 front wing, will be done over the next week.
thank you ALL for your help, best wishes, kind words and most of all PATIENCE AND TRUST in me, while i have been on this quest to get the panels we needed sorted out !!!
ONWARDS AND UPWARDS !!!
LLOYD
Re: panel remanufacture 2015
Posted: Sun Mar 29, 2015 12:53 pm
by Lloydpiestate
hi again,
just to clarify, i am doing BOTH mk1 and mk2 rear wings, in half wing size and arch repairs, i have only posted a pic of the mk2 rear and this seems to of caused some confusion, sorry.
Re: panel remanufacture 2015
Posted: Sun Mar 29, 2015 3:44 pm
by Lloydpiestate
pics and sizes of mk1 rear arch repair and half wing, and also mk2 front wing arch repair panel and half wing.
mk2 rear wing panels are of the same dimensions
Re: panel remanufacture 2015
Posted: Sun Apr 12, 2015 12:10 pm
by Lloydpiestate
hi all,
i forgot to inform you all last week, that the order has gone in and the manufacturer did leave me a window as they knew my order was comming, so delivery date is around 6-8 weeks instead of the usual 3-4 months !!
i am compiling the next order to go in already, so if you need something, let me know, i shall be buying excess of most panels so i have stock, but how long that stock lasts, i dont know, so dont rely on it, IF you require panels, please place an order so you are assured to get what you want.
I AM AWAITING FRONT WHEEL ARCH BOWL PRICES ( FULL AND REPAIR ), JACKING POINTS, MK1 FRONT LOWER VALANCE AND FLOORPANS, i simply didnt have room to take the extended floorpan / bulkhead section with me to get a price, will do that in a month or so.
I NEED A MK1 AND MK2 REAR LOWER VALANCE, SO I CAN GET THESE REMANUFACTURED, ANY ONE GOT EITHER ?? lee sellers, did you mention you had one i could use, or was that the rear light panel ?? I STILL ALSO NEED MK1 AND MK2 OUTER REAR ARCH BOWLS.
Re: panel remanufacture 2015
Posted: Mon Apr 20, 2015 6:01 pm
by Lloydpiestate
hi all,
ive just got my hands on a load of nos mk2 rear wing panels.
if anyone is interested, please email me on
lloyd.reed01@virgin.net
Re: panel remanufacture 2015
Posted: Wed Jun 24, 2015 8:01 pm
by badger
Hi Lloyd, any updates?
Regards,
Ady.
Re: panel remanufacture 2015
Posted: Thu Jun 25, 2015 5:16 am
by Lloydpiestate
hi adrian,
you must be a mind reader !
i emailed the manufacturer yesterday to check on progress, and will post reply as soon as i get it.
the timescale given, was around 3 months and that is approaching soon
all the best
lloyd
p.s how did the house move go, you all settled in now ?
Re: panel remanufacture 2015
Posted: Tue Jun 30, 2015 12:53 pm
by badger
Hi Lloyd,
That's good news. Yes the move went well thanks, busy with gardening and DIY for the next 6 months!!
Regards
Ady.
Re: panel remanufacture 2015
Posted: Fri Jul 10, 2015 7:48 pm
by Simon2000
Hi Lloyd, Its great what your doing here. I'm after repair sections for a 2000 MK2, the curved sections at front of the car at the bottom corner next the wheel at the front attached to the front bottom valance. I've not stripped it back yet but it looks like it just the edge near the wheel not the whole section.
Is this available? Whats the cost? Am I better just making one?