mk1 front wing sections remanufacture

Bodywork, interior and exterior trim and glass, bumpers, etc.
Message
Author
Lloydpiestate
Senior Member
Senior Member
Posts:492
Joined:Thu Jan 01, 1970 12:33 am
Location:cardiff
Re: mk1 front wing sections remanufacture

#31 Post by Lloydpiestate » Thu Sep 26, 2013 5:50 pm

hi kev,
and thanks for your concern,

dont worry, i wont be undertaking anything that is already being done, unless the quality of that panel needs to be improved, as for now i just want the most urgent unobtainable panels done first.

i know what manufacturer are doing the stag inners, but as of yet i havent contacted them to see from what tooling / template they are using ( assuming they will tell me ) to access quality.

i have had the offer of a full set of mk 1&2 inners as ive mentioned before, so if the mk1 and estates need readressing, i can do so.

lloyd

Sinc1964
Newbie
Newbie
Posts:4
Joined:Wed Jun 06, 2018 8:45 pm

Re: mk1 front wing sections remanufacture

#32 Post by Sinc1964 » Mon Jul 16, 2018 5:03 pm

Just been reading through lots of posts regarding Mk1 front and rear wing repair panels, granted most of the conversations are some years old now, but I have recently acquired a 1967 Mk1 2000 and wondered if the repair panels were ever produced. If so, who would be the person to get in contact with ?

Many thanks.

johnnydog
Senior Member
Senior Member
Posts:1624
Joined:Tue May 14, 2013 12:33 pm
Location:Lancashire

Re: mk1 front wing sections remanufacture

#33 Post by johnnydog » Mon Jul 16, 2018 6:14 pm

The 5th post on page two of this topic has the details of Lloyd Reed who has instigated the manufacyure of these panels. He is the person to get in touch with, using those details or by a pm. As the forum is relatively quiet these days due to the Facebook fan page, I would suggest using the details given earlier in this topic.
Register Member no. 1596

1967 Mk1 2000 in Gunmetal Grey
1969 Mk1 2000 in Royal Blue
1970 Mk2 2000 in Valencia Blue
1972 Mk2 2.5 PI in Triumph White
1973 Mk2 2.5 PI in Sienna Brown
1976 Mk2 2500S in Carmine Red

User avatar
johnconradlee
Senior Member
Senior Member
Posts:367
Joined:Thu Jan 01, 1970 12:33 am
Location:Havant, Nr Portsmouth, England

Re: mk1 front wing sections remanufacture

#34 Post by johnconradlee » Tue Jul 17, 2018 7:44 am

Lloyd has also had a website set up https://southwalestriumphs.com/ which has prices and ordering information.
John Lee

1966 Triumph 2000 Mk1 "LuLU" (the Lee family Triumph) - various shades of Green and rust - The engine runs, she's alive!!!!

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests