Hi all,
I rebuilt my engine and have to change the rocker shaft.
CW sell hardened shaft but only for MK2. Do you know if there is a solution for hardened shaft on a MK1 ?
Thanks for your help.
Fabien
MK1 Rocker shaft
-
- Newbie
- Posts:17
- Joined:Fri Jan 08, 2016 12:20 pm
- Location:France - Indre et Loire
Land Rover 88 SIIA
TR3 Puzzle... to be rebuilt
2000 MK1
TR3 Puzzle... to be rebuilt
2000 MK1
-
- Newbie
- Posts:17
- Joined:Fri Jan 08, 2016 12:20 pm
- Location:France - Indre et Loire
Re: MK1 Rocker shaft
I asked Rimmer about this and they answered that their tuftride 214559 should also fit on MK1.
...
I'm just surprised that CW have a tuftride shaft for all... except MK1 !
If someone have tested it... ?
Fabien
...
I'm just surprised that CW have a tuftride shaft for all... except MK1 !
If someone have tested it... ?
Fabien
Land Rover 88 SIIA
TR3 Puzzle... to be rebuilt
2000 MK1
TR3 Puzzle... to be rebuilt
2000 MK1
-
- Groupie
- Posts:84
- Joined:Fri Aug 01, 2014 2:50 pm
- Location:Luton
Re: MK1 Rocker shaft
you can modify a longer mk2 shaft to fit with the orig MK1 pedestals , it needs shortening and instead of the mk1 collar and splitpin end cap, tap the oil way and fit a setcrew and washer did this on my 1600 and 10 years on still going afaik.
pete
pete
Pete Lewis
Luton
also area organiser for herts and beds tssc.
Luton
also area organiser for herts and beds tssc.
Who is online
Users browsing this forum: No registered users and 14 guests