Page 2 of 3
Re: engine mounts
Posted: Tue May 19, 2015 5:24 am
by widget
james is currently out of stock
Re: engine mounts
Posted: Wed May 20, 2015 5:13 pm
by widget
i'll check the dimentions against the one on the car...might be worth getting as a stopgap till james has some in
Re: engine mounts
Posted: Mon Jul 04, 2016 12:01 pm
by Triumph only
Lee show mine were completely worn out during last National!!! They were brand new 5 years ago...
Fortunately Thorsten had very effective ones if not cheap you can find here:
http://aws-cf.caradisiac.com/prod/photo ... b7.jpg?v=1
Ordered, to be followed.....
Re: engine mounts
Posted: Tue Jul 05, 2016 5:23 am
by SimonO
Only uprated ones I can find are the Vibra-Technics ones on ebay;
http://www.ebay.co.uk/itm/142038924555
Re: engine mounts
Posted: Tue Jul 05, 2016 9:44 am
by Dazzer
After numerous engine mount failures during competition I sent an engine mount to vibra tech and they made some up from Caterham mounts I think. Been on four years now perfect.
Three times the price of standards but fit and forget.
Dazzer
Re: engine mounts
Posted: Tue Jul 05, 2016 6:34 pm
by tony
Greg Tunstell in Australia also has good one's. They're not cheap but don't fall apart.
Tony.
Re: engine mounts
Posted: Tue Jul 05, 2016 6:39 pm
by Triumph only
Oups, I posted the wrong link... It is Vibra-Technics as well, direct link:
http://www.vibra-technics.co.uk/mg_rove ... gine_mount
Re: engine mounts
Posted: Wed Jul 06, 2016 9:17 pm
by herald1360
Hi Al
I fitted new engine mounts supplied by Canley classics about £7.00 each all good after about 2 years
Hope this helps
Paul
Re: engine mounts
Posted: Fri Oct 28, 2016 10:15 pm
by DDAY
This is the easy engine mount modification I made/found, working in a breakers yard my eyes where peeled for something better!
Anyway this is what I found, P38 V8 Range Rover gearbox mounts. Small modification as you can see to take the bottom stud, been on over a year now and no signs of wear!
Images:
https://www.flickr.com/photos/144504807 ... res/NUA14L
Hope you can see images!
Re: engine mounts
Posted: Fri Oct 28, 2016 11:47 pm
by TedTaylor
DDAY wrote:Hope you can see images!
Nope
MUT