Page 2 of 4
Re: Time Warp Pi
Posted: Fri Jun 01, 2018 7:09 pm
by Charles H
Re: Time Warp Pi
Posted: Sat Jun 02, 2018 11:59 am
by Tinsmith_Skippy
I think I would need to enlist some additional help to get it to the national, Anyone?
Thanks guys, 22 sleeps me and the minions have work to do!
Slight change of plan the suspension parts came back from soda blaster and media blasting. With good weather over the weekend I’ve managed to get them coated so they can harden off this week ready for rebuilding.
Re: Time Warp Pi
Posted: Mon Jun 04, 2018 7:04 am
by Tinsmith_Skippy
Started striping back the engine bay last night, reason one for an epoxy primer when your your car is a long term project!
Newspaper when the car was primered back in 1996 and it didn’t hold up very well, it’s rusted under the coating.
Was really hoping it was a primer over the original paint. Anyway all
striped masked ready for a coat of etch primer.
Re: Time Warp Pi
Posted: Wed Jun 06, 2018 8:52 am
by Tinsmith_Skippy
Managed last night to get the etch primer coat on. Let that anchor itself over the weekend.
Re: Time Warp Pi
Posted: Sat Jun 09, 2018 1:27 pm
by Tinsmith_Skippy
Re: Time Warp Pi
Posted: Sun Jun 10, 2018 9:35 am
by Tinsmith_Skippy
Re: Time Warp Pi
Posted: Sun Jun 10, 2018 7:42 pm
by johnnydog
Tinsmith_Skippy wrote: ↑Sat Jun 09, 2018 1:27 pm
Re building the suspension brakes steering this morning and sorting other bits and bobs.
Ross,
I think your spraying skills are far better than most - buying the small GT was just excuse to get another car!!!!!!
Thinking about it, that excuse sounds familiar actually!!!!!
Just one point though, and I presume you actually know - the D rubbers on the track control arms should be fitted the other way round from how you have them in the photo - the flat side of the D rubber goes in the cup either side of the chassis rail. The curved side goes to the flat washer on the arm, and against the loose washer and nyloc nut end on the threaded end.
Re: Time Warp Pi
Posted: Mon Jun 11, 2018 9:41 am
by Tinsmith_Skippy
Ok which one of you did that. I even left you with the workshop manuals.
Re: Time Warp Pi
Posted: Mon Jun 11, 2018 9:41 am
by Tinsmith_Skippy
Ok which one of you did that. I even left you with the workshop manuals.
Re: Time Warp Pi
Posted: Mon Jun 11, 2018 4:50 pm
by Charles H