Hazard warning wiring

Batteries, Alternator, Wiring, Lighting, etc. (Please discuss ignition problems in the Engine category)
Post Reply
Message
Author
kennyd
Newbie
Newbie
Posts: 6
Joined: Thu Apr 13, 2017 11:28 am

Hazard warning wiring

#1 Post by kennyd » Thu Aug 17, 2017 12:02 pm

Hello, my 1974 2000 was not fitted with Hazard warning facilities through the indicators, I have the correct switch for the car, In advance of fitting this can anyone advise me if appropriate wiring for the switch is easy to access and where ? regards Kenny.

Mike Stevens
Site Admin
Site Admin
Posts: 3361
Joined: Mon May 08, 2006 9:50 pm
Location: South Oxfordshire, UK

Re: Hazard warning wiring

#2 Post by Mike Stevens » Thu Aug 17, 2017 9:51 pm

If you look at the wiring diagram for a later car which has hazard warning lights as standard, then that should show you what to wire where.

I am intending to do this to my 1971 PI and so will be going through the same process very soon! I have obtained the correct mating connector (from an old, later wiring loom). This, spliced into the existing loom should give me the correct connections.

Cheers,
Mike.
(South Oxfordshire)
Register Member No 0355
1967 Herald 1200 Convertible rust should be white
1971 2.5PI Saloon Sapphire blue
1973 2.5PI Saloon rust some Honeysuckle
1973 Stag French blue
(1949 LandRover was blue should be light green!)

tony
Senior Member
Senior Member
Posts: 690
Joined: Sun Jun 14, 2009 5:35 am
Location: New Zealand

Re: Hazard warning wiring

#3 Post by tony » Fri Aug 18, 2017 6:50 am

Basically simple and I'm no auto sparky. As Mike says, get hold of a suitable wiring diagram. I did my Spitfire using an old 2500 hazard switch that I had.
Tony.
1976 2500 TC.

Lots of bits

1999 BMW Z3.
2003 BMW 525i Touring.
Hopefully not needing too many bits.




.
Hopefully don't need bits !

Phil T
Newbie
Newbie
Posts: 8
Joined: Wed Aug 13, 2014 3:55 pm

Re: Hazard warning wiring

#4 Post by Phil T » Fri Aug 18, 2017 7:38 am

Interesting.

I have a 1974 2000 with hazard warning, and they get used twice a year.

First time when I test for the MOT, second time during the MOT......

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest