Page 1 of 1

Hazard warning wiring

Posted: Thu Aug 17, 2017 12:02 pm
by kennyd
Hello, my 1974 2000 was not fitted with Hazard warning facilities through the indicators, I have the correct switch for the car, In advance of fitting this can anyone advise me if appropriate wiring for the switch is easy to access and where ? regards Kenny.

Re: Hazard warning wiring

Posted: Thu Aug 17, 2017 9:51 pm
by Mike Stevens
If you look at the wiring diagram for a later car which has hazard warning lights as standard, then that should show you what to wire where.

I am intending to do this to my 1971 PI and so will be going through the same process very soon! I have obtained the correct mating connector (from an old, later wiring loom). This, spliced into the existing loom should give me the correct connections.

Cheers,
Mike.

Re: Hazard warning wiring

Posted: Fri Aug 18, 2017 6:50 am
by tony
Basically simple and I'm no auto sparky. As Mike says, get hold of a suitable wiring diagram. I did my Spitfire using an old 2500 hazard switch that I had.
Tony.

Re: Hazard warning wiring

Posted: Fri Aug 18, 2017 7:38 am
by Phil T
Interesting.

I have a 1974 2000 with hazard warning, and they get used twice a year.

First time when I test for the MOT, second time during the MOT......