OK now got the engine home, but it will have to wait a while before I get to look at it properly as I have two other engines ahead of it awaiting rebuilds.(Little A series for two friends with A35s which I can do with my eyes closed),
As far as I can tell what I need is a timing cover, rocker assembly, pushrods , a dipstick (!!) and , because it only has three head studs, a set of studs nuts and washers which I see are quire costly.
The head number is 516816 which seems to be the right one to go with the engine number so 8.125" pushrods seem to be the ones ?
If anyone can help please let me know (jonnydog ?)
WANTED - rocker assembly and pushrods
Forum rules
1. Strictly no trade advertisements - private ads only. 2. No complete cars (unless for breaking) must be advertised on here. Parts and spares only. Complete cars must be advertised via the main website only which is free for Members and £5 for non-members. 3. Maximum 4 pictures for any one ad. 4. Sensitive communication should be by Private Message - placing of personal information anywhere on this forum is done at the individuals risk.
1. Strictly no trade advertisements - private ads only. 2. No complete cars (unless for breaking) must be advertised on here. Parts and spares only. Complete cars must be advertised via the main website only which is free for Members and £5 for non-members. 3. Maximum 4 pictures for any one ad. 4. Sensitive communication should be by Private Message - placing of personal information anywhere on this forum is done at the individuals risk.
Re: WANTED - rocker assembly and pushrods
I will start checking what I have and let you know in the week.
Register Member no. 1596
1967 Mk1 2000 in Gunmetal Grey
1969 Mk1 2000 in Royal Blue
1970 Mk2 2000 in Valencia Blue
1972 Mk2 2.5 PI in Triumph White
1973 Mk2 2.5 PI in Sienna Brown
1976 Mk2 2500S in Carmine Red
1967 Mk1 2000 in Gunmetal Grey
1969 Mk1 2000 in Royal Blue
1970 Mk2 2000 in Valencia Blue
1972 Mk2 2.5 PI in Triumph White
1973 Mk2 2.5 PI in Sienna Brown
1976 Mk2 2500S in Carmine Red
Re: WANTED - rocker assembly and pushrods
Just to confirm - do you want the studs in the block for the head, or the studs in the head for the rocker / rocker cover assembly?
Sorry if I have not understood you correctly!!
Sorry if I have not understood you correctly!!
Register Member no. 1596
1967 Mk1 2000 in Gunmetal Grey
1969 Mk1 2000 in Royal Blue
1970 Mk2 2000 in Valencia Blue
1972 Mk2 2.5 PI in Triumph White
1973 Mk2 2.5 PI in Sienna Brown
1976 Mk2 2500S in Carmine Red
1967 Mk1 2000 in Gunmetal Grey
1969 Mk1 2000 in Royal Blue
1970 Mk2 2000 in Valencia Blue
1972 Mk2 2.5 PI in Triumph White
1973 Mk2 2.5 PI in Sienna Brown
1976 Mk2 2500S in Carmine Red
Re: WANTED - rocker assembly and pushrods
Looks like I need both !
Thank you for looking for me.
Thank you for looking for me.
Re: WANTED - rocker assembly and pushrods
So far I have found the following parts you require -
Rocker shaft complete plus studs if required
8.125 pushrods - set
2.5 timing cover and fastenings
Dipstick
14 cylinder head studs - 7/16ths unf plus nuts washers etc
Rocker cover studs
I have sent you a pm......
Rocker shaft complete plus studs if required
8.125 pushrods - set
2.5 timing cover and fastenings
Dipstick
14 cylinder head studs - 7/16ths unf plus nuts washers etc
Rocker cover studs
I have sent you a pm......
Register Member no. 1596
1967 Mk1 2000 in Gunmetal Grey
1969 Mk1 2000 in Royal Blue
1970 Mk2 2000 in Valencia Blue
1972 Mk2 2.5 PI in Triumph White
1973 Mk2 2.5 PI in Sienna Brown
1976 Mk2 2500S in Carmine Red
1967 Mk1 2000 in Gunmetal Grey
1969 Mk1 2000 in Royal Blue
1970 Mk2 2000 in Valencia Blue
1972 Mk2 2.5 PI in Triumph White
1973 Mk2 2.5 PI in Sienna Brown
1976 Mk2 2500S in Carmine Red
Re: WANTED - rocker assembly and pushrods
That is great - thank you.
Can,t see a PM I am afraid.
Do I need to do anything other than click on "private messages" at the top right to see it ?
I have received from another two private messages and can see those by doing so so not sure what is going wrong.
I am on 07941 449277 if you wanted to call this weekend perhaps ?
Can,t see a PM I am afraid.
Do I need to do anything other than click on "private messages" at the top right to see it ?
I have received from another two private messages and can see those by doing so so not sure what is going wrong.
I am on 07941 449277 if you wanted to call this weekend perhaps ?
Re: WANTED - rocker assembly and pushrods
Thanks for the info. I have had pm's previously that haven't got to the intended recipitant - perhaps it is me!
I have now sent you a email and will be in touch Monday.
I have now sent you a email and will be in touch Monday.
Register Member no. 1596
1967 Mk1 2000 in Gunmetal Grey
1969 Mk1 2000 in Royal Blue
1970 Mk2 2000 in Valencia Blue
1972 Mk2 2.5 PI in Triumph White
1973 Mk2 2.5 PI in Sienna Brown
1976 Mk2 2500S in Carmine Red
1967 Mk1 2000 in Gunmetal Grey
1969 Mk1 2000 in Royal Blue
1970 Mk2 2000 in Valencia Blue
1972 Mk2 2.5 PI in Triumph White
1973 Mk2 2.5 PI in Sienna Brown
1976 Mk2 2500S in Carmine Red
Who is online
Users browsing this forum: No registered users and 8 guests