Bolt-in full roll cage for saloon
Forum rules
1. Strictly no trade advertisements - private ads only. 2. No complete cars (unless for breaking) must be advertised on here. Parts and spares only. Complete cars must be advertised via the main website only which is free for Members and £5 for non-members. 3. Maximum 4 pictures for any one ad. 4. Sensitive communication should be by Private Message - placing of personal information anywhere on this forum is done at the individuals risk.
1. Strictly no trade advertisements - private ads only. 2. No complete cars (unless for breaking) must be advertised on here. Parts and spares only. Complete cars must be advertised via the main website only which is free for Members and £5 for non-members. 3. Maximum 4 pictures for any one ad. 4. Sensitive communication should be by Private Message - placing of personal information anywhere on this forum is done at the individuals risk.
- triumphman
- Groupie
- Posts:55
- Joined:Fri Sep 16, 2005 10:05 pm
- Location:United Kingdom
I'm selling the roll cage that was in the Mk 1 when we used to race it. It is in excellent condition (unlike the car!) and comes complete with door bars, all fixings and a bit of free padding in the area of the driver's seat. It was built to order in, I think, about 1996. I have at last started to dismantle the racing car and would like the bits that I no longer need to go to a good home. But I'm not going to give it away - sensible offers, please (and yes, I do know how much they cost to have made).
Andy Roberts
Hon. President
1974 Del Lines Stag Estate Black and Blue VML 3M (was TNH 10, then JJH 818N)
1975 Del Lines Stag Saloon Mimosa JNY 590N "Janey"
1974 Triumph 2000 Saloon Pimento SAD 971N "Sadie"
Blog: Andy's Triumph Stuff
Hon. President
1974 Del Lines Stag Estate Black and Blue VML 3M (was TNH 10, then JJH 818N)
1975 Del Lines Stag Saloon Mimosa JNY 590N "Janey"
1974 Triumph 2000 Saloon Pimento SAD 971N "Sadie"
Blog: Andy's Triumph Stuff
- triumphman
- Groupie
- Posts:55
- Joined:Fri Sep 16, 2005 10:05 pm
- Location:United Kingdom
Re: Bolt-in full roll cage for saloon
Andy Roberts
Hon. President
1974 Del Lines Stag Estate Black and Blue VML 3M (was TNH 10, then JJH 818N)
1975 Del Lines Stag Saloon Mimosa JNY 590N "Janey"
1974 Triumph 2000 Saloon Pimento SAD 971N "Sadie"
Blog: Andy's Triumph Stuff
Hon. President
1974 Del Lines Stag Estate Black and Blue VML 3M (was TNH 10, then JJH 818N)
1975 Del Lines Stag Saloon Mimosa JNY 590N "Janey"
1974 Triumph 2000 Saloon Pimento SAD 971N "Sadie"
Blog: Andy's Triumph Stuff
Re: Bolt-in full roll cage for saloon
andy
are we talking of
1- slippy diff [plate or ramp]?
2-13x6 wide wheels
3- laminated screen
4- alloy fuel tank
5- big brakes [on front]
7- engine + box + ancilaries
8- small steering wheel
9- quick rack [steering]
10- adj. neg camber set up for front end
could be interested in any, or all of these
plus owt else
racer
are we talking of
1- slippy diff [plate or ramp]?
2-13x6 wide wheels
3- laminated screen
4- alloy fuel tank
5- big brakes [on front]
7- engine + box + ancilaries
8- small steering wheel
9- quick rack [steering]
10- adj. neg camber set up for front end
could be interested in any, or all of these
plus owt else
racer
- triumphman
- Groupie
- Posts:55
- Joined:Fri Sep 16, 2005 10:05 pm
- Location:United Kingdom
Re: Bolt-in full roll cage for saloon
Hi "racer",racer wrote:andy
are we talking of
1- slippy diff [plate or ramp]?
2-13x6 wide wheels
3- laminated screen
4- alloy fuel tank
5- big brakes [on front]
7- engine + box + ancilaries
8- small steering wheel
9- quick rack [steering]
10- adj. neg camber set up for front end
could be interested in any, or all of these
plus owt else
racer
No, we are talking of a roll cage. Just the roll cage. The car was involved in a front end "racing incident" way back when, so many of the parts you're asking about are damaged. The ones that aren't damaged are (at the moment, anyway) earmarked for my personal use on one of my other Triumphs. But I have no further use for the full roll cage, so I'm looking to sell it.
Andy
Andy Roberts
Hon. President
1974 Del Lines Stag Estate Black and Blue VML 3M (was TNH 10, then JJH 818N)
1975 Del Lines Stag Saloon Mimosa JNY 590N "Janey"
1974 Triumph 2000 Saloon Pimento SAD 971N "Sadie"
Blog: Andy's Triumph Stuff
Hon. President
1974 Del Lines Stag Estate Black and Blue VML 3M (was TNH 10, then JJH 818N)
1975 Del Lines Stag Saloon Mimosa JNY 590N "Janey"
1974 Triumph 2000 Saloon Pimento SAD 971N "Sadie"
Blog: Andy's Triumph Stuff
Re: Bolt-in full roll cage for saloon
Andy
I'm interested in your cage for my mk1 rally car. Could you drop me an email please?
Tony.sheach@live.co.uk
Regards
Tony
I'm interested in your cage for my mk1 rally car. Could you drop me an email please?
Tony.sheach@live.co.uk
Regards
Tony
- triumphman
- Groupie
- Posts:55
- Joined:Fri Sep 16, 2005 10:05 pm
- Location:United Kingdom
Re: Bolt-in full roll cage for saloon
Done.TR4Tony wrote:Could you drop me an email please?
Andy Roberts
Hon. President
1974 Del Lines Stag Estate Black and Blue VML 3M (was TNH 10, then JJH 818N)
1975 Del Lines Stag Saloon Mimosa JNY 590N "Janey"
1974 Triumph 2000 Saloon Pimento SAD 971N "Sadie"
Blog: Andy's Triumph Stuff
Hon. President
1974 Del Lines Stag Estate Black and Blue VML 3M (was TNH 10, then JJH 818N)
1975 Del Lines Stag Saloon Mimosa JNY 590N "Janey"
1974 Triumph 2000 Saloon Pimento SAD 971N "Sadie"
Blog: Andy's Triumph Stuff
Who is online
Users browsing this forum: No registered users and 8 guests