Everything that keeps your car in contact with the road, and from contacting other road users.
Post Reply
Posts: 84
Joined: Tue Oct 07, 2008 6:23 pm


#1 Post by t2000 » Thu Dec 20, 2018 5:02 pm

Hi I have the stag type m/cylinder & have to pump the brakes to get any tried bleeding them but no good pedal travels to the floor slowly there is no fluid in the servo and am not losing any fluid m/ cylinder seals? easy job?tia,

Charles H
Senior Member
Senior Member
Posts: 1425
Joined: Mon Jan 15, 2007 2:38 pm
Location: Folkestone

Re: m/cylinder

#2 Post by Charles H » Fri Dec 21, 2018 11:45 am

Sounds like fluid escaping past the main master cylinder seal to me. That is why you are not loosing any fluid. Try a new seal kit and inspect the cylinder bore for scouring.
Charles Harrison
Register member 3095
Cherry Red Mk1 2000 Rally Car
Mallard Blue 2.5PI
Sapphire Blue GT6 Mk3
Vermillion Red Spitfire 1500
Pimento Red TR6
Pimento Red Stag
Inky Blue VW Passat B5.5
Arctic Blue Jaguar XJ40

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest