Hello everyone any one seen one of these before?
[
Oil Filter Assembly
-
- Groupie
- Posts:34
- Joined:Thu Jan 01, 1970 12:33 am
- Location:Isle of Wight - United Kingdom
- Contact:
Re: Oil Filter Assembly
I have seen similar. Using such a device allows for the fitting of a larger and or more accessible oil filter. Also using a remote filter can mean that you can orientate it better - less draining back - so the filter does not empty when the engine is turned off..
-
- Senior Member
- Posts:288
- Joined:Tue Nov 19, 2013 8:50 pm
Re: Oil Filter Assembly
Hello Steve I really like this filter set up. It seems very much like an oldschool ripspeed item that you would save up your weekly YTS money and blow it all on your car mods. The only thing that cocearns me is the hose connections (jubilee clips). I'm sure the metal hose connections are flared but there is something reassuring about crimped fittings, however anything can happen with them I suppose. I'm thinking of removing the metal connections and tapping the holes and using these fittings which are going to cost the same as a spin on filter, is it just a pie in the sky idea and just go with the original setup.
Re: Oil Filter Assembly
Hi Ross,really like the look of that! Could you braze your fittings on to the four inlet/outlets,then get a pair of hoses made up at Hydrasun or Pirtek?(other hose manufacturers are available )
Pirtek will be able to do a rubber braided, or an outer braided/Goodrich type.
I did kinda the same thing in the early eighties, when I changed out the auto box for a MOD.I then cleaned out the redundant trans cooler, brazed on two fittings and had hoses to suit the adaptor, using it as an oil cooler.
Just a thought,I'm sure you will come up with something of merit!!
Good Luck!
Pirtek will be able to do a rubber braided, or an outer braided/Goodrich type.
I did kinda the same thing in the early eighties, when I changed out the auto box for a MOD.I then cleaned out the redundant trans cooler, brazed on two fittings and had hoses to suit the adaptor, using it as an oil cooler.
Just a thought,I'm sure you will come up with something of merit!!
Good Luck!
Bill Young
1967 MK1 2000 MSS8E
1971 minivan IUI1588
1981 minivan TDS40W Now PMY453W
1962Greeves Sports Tourer 24DC 114 GGD
1998 Honda CB750, Deep Candy Apple Red.13500 Miles R191DVR
2020 Renault Trafic crew van 12 Miles 02-11-2020 TDS40W
1967 MK1 2000 MSS8E
1971 minivan IUI1588
1981 minivan TDS40W Now PMY453W
1962Greeves Sports Tourer 24DC 114 GGD
1998 Honda CB750, Deep Candy Apple Red.13500 Miles R191DVR
2020 Renault Trafic crew van 12 Miles 02-11-2020 TDS40W
- Alan Chatterton
- Senior Member
- Posts:2945
- Joined:Fri Feb 06, 2004 11:18 pm
- Location:Redditch, Worcestershire
Oil Filter Assembly
Early 1980's solution to the oil filter problem with our cars. Dave Bradley Engineering if I recall.
Superseded by the mocal Chris Witor solution with machines boss to fit spin on filter as direct replacement.
Sent from my iPhone using Tapatalk
Superseded by the mocal Chris Witor solution with machines boss to fit spin on filter as direct replacement.
Sent from my iPhone using Tapatalk
Alan Chatterton
Location; Redditch
DEL 33 1972 Lines Stag Estate Tartan Red
Blog http://vml3m.blogspot.com/
Location; Redditch
DEL 33 1972 Lines Stag Estate Tartan Red
Blog http://vml3m.blogspot.com/
Who is online
Users browsing this forum: No registered users and 3 guests