canley classic stock new
216461 BRAKE DRUM - 2000 2.5 MKII £28.00 EACH IN STOCK
Pete
Search found 84 matches
- Thu Jun 22, 2017 11:54 am
- Forum: Steering, Suspension, Braking, Wheels & Tyres
- Topic: Converting to Stag rear drums...
- Replies: 8
- Views: 9448
- Thu Jun 22, 2017 11:51 am
- Forum: General Triumph 2000 Discussion
- Topic: Carburettor Identification AUC8490 (Will they fit?)
- Replies: 7
- Views: 8337
Re: Carburettor Identification AUC8490 (Will they fit?)
just looked in my SU manual and it shows all the numbers for every car but not the numbers for main body or the top piston cover ...sorry
a search on Burlen drew a blank but maybe give them a call
Pete
a search on Burlen drew a blank but maybe give them a call
Pete
- Fri May 26, 2017 8:37 am
- Forum: Steering, Suspension, Braking, Wheels & Tyres
- Topic: Hand brake adjustment
- Replies: 14
- Views: 15168
Re: Hand brake adjustment
my original quest was that if you need the 518681/2 assy for the saloons they are not overly available they are well know for the bell crank to seize , this assy was used on many cars of the time .many seized, and mis adjusted cables were the results. the bell crank can wear where the shoe web conta...
- Wed May 24, 2017 7:05 am
- Forum: Steering, Suspension, Braking, Wheels & Tyres
- Topic: Hand brake adjustment
- Replies: 14
- Views: 15168
Re: Hand brake adjustment
Think I said in my hb expander exercise the after market bonded shoes were terrible continually turning the facing into a black residue , putting the old riveted oe spec shoes transformed the braking Incidently Rodsport saidnthe TR7 has the same expander as the saloon But the longer lever helps a lo...
- Mon May 15, 2017 1:18 pm
- Forum: Engine
- Topic: Cylinder block drain tap
- Replies: 9
- Views: 9702
Re: Cylinder block drain tap
if you want to check the actual temperature get a cheap thermometer from the chemist and stick it in the header . or get a infra red remote reader , it will always read high after a stop as the circulation has ceased and the block heat is absorbed by the coolant thats normal. driving gets ram air id...
- Mon May 15, 2017 1:08 pm
- Forum: Engine
- Topic: Idling too quickly
- Replies: 9
- Views: 9420
Re: Idling too quickly
if they have temperature compensators on the side they may be set open when they need to be closed at normal temperatures held on the side with 2 screws, and sealed to the body with two O rings , the plunger inside needs to be seated closed, adjust by tighten the small nut on the bi metal strip.. it...
- Mon May 15, 2017 12:59 pm
- Forum: Body and Trim
- Topic: Radio Mounting
- Replies: 12
- Views: 13248
Re: Radio Mounting
you may need a plastic filler panel to make it DIN fitting size eg
https://www.rimmerbros.co.uk/Item--i-GRID008670
also available from others .
Pete
https://www.rimmerbros.co.uk/Item--i-GRID008670
also available from others .
Pete
- Wed May 03, 2017 5:12 pm
- Forum: Steering, Suspension, Braking, Wheels & Tyres
- Topic: mk2 lockheed brake shoe expander
- Replies: 3
- Views: 4857
Re: mk2 lockheed brake shoe expander
They are on and work fine just a small adjust to the cable 6 clicks stalls the car , realy pleased the idea worked out so 519070/71 stag assy are the way to go If you have any concerns about the cable lever you can drill a clevis hole to replicate the 2000 spec and then you have the choice as both 2...
- Tue May 02, 2017 5:41 pm
- Forum: Steering, Suspension, Braking, Wheels & Tyres
- Topic: mk2 lockheed brake shoe expander
- Replies: 3
- Views: 4857
Re: mk2 lockheed brake shoe expander
Yes , theres been a lot of photo enhance to identify lockheed numbers and the longer actuating lever is only working the hand brake I have purchased a set of stag and dimensionaly the afermarket repros are identical other than the longer L shaped hand brake lever clevis hole postion rebuild tomorrow...
- Tue May 02, 2017 3:44 pm
- Forum: Steering, Suspension, Braking, Wheels & Tyres
- Topic: mk2 lockheed brake shoe expander
- Replies: 3
- Views: 4857
mk2 lockheed brake shoe expander
whilst refurbing the rear brakes on my mk2 to get a handbrake the primary lever pivot was well worn easy to replace with a shanked bolt , so whats available ..for 2000 diddly squat , so what the difference to the Stag expander, which is cheaper and easily available well the following spells out a mi...