Search found 390 matches

by leesellars
Sat Mar 14, 2015 9:00 pm
Forum: Engine
Topic: P.I running issues.
Replies: 33
Views: 6525

Re: P.I running issues.

Sounds like it's pulling air inbetween the head and throttle body. Also check the vacume hoses. Including the one in between the throttle body's and one onto the MU. The hoses should be supple

Lee
by leesellars
Fri Mar 13, 2015 7:01 pm
Forum: Electrical Systems
Topic: Headlights
Replies: 5
Views: 2231

Re: Headlights

Bad Earth some where on red circuit.

Lee
by leesellars
Thu Mar 12, 2015 9:17 am
Forum: Engine
Topic: How do i check injectors are spraying?
Replies: 13
Views: 2694

Re: How do i check injectors are spraying?

Have had the MU refurbished? They need new seals in to run on unleaded. Do not start adjusting anything. The injectors need new unleaded seals in aswell.

Lee
by leesellars
Tue Mar 10, 2015 9:37 pm
Forum: Engine
Topic: How do i check injectors are spraying?
Replies: 13
Views: 2694

Re: How do i check injectors are spraying?

You should have the engine running. It does take a while to get the air out just pull the needle up and it will start to dribble a bit but just keep pulling it and letting go it will bleed. Must have it running.

Lee
by leesellars
Tue Mar 10, 2015 6:06 pm
Forum: Engine
Topic: How do i check injectors are spraying?
Replies: 13
Views: 2694

Re: How do i check injectors are spraying?

There should be a decent cone pulsing. Do whilest engine Is running. The note will change but it will still run. Check cone pointing it vertical up. As exhaust is directly below.

Lee
by leesellars
Sun Mar 08, 2015 8:32 pm
Forum: Engine
Topic: Tapping noise
Replies: 34
Views: 6631

Re: Tapping noise

Millers classic 20/50 cheep enough. good oil great in old engines


Lee
by leesellars
Thu Mar 05, 2015 11:28 am
Forum: Parts for Sale and Wanted
Topic: 2000 mk2 indicator Stalk wanted please.
Replies: 12
Views: 3176

Re: 2000 mk2 indicator Stalk wanted please.

Rimmers still have in stock

Lee
by leesellars
Mon Feb 16, 2015 11:25 pm
Forum: Modifications
Topic: sump guard MK1
Replies: 5
Views: 3296

Re: sump guard MK1

Widget

You want a alli plate 1000mm x 600mm wide. 6mm or 8mm. flat plate. It cost me about £120.00 to get mine made. You will have to weld underneath on the legs two brackets and a frame made to go underneath the engine cross member.

Lee
by leesellars
Sun Feb 08, 2015 8:59 pm
Forum: Parts for Sale and Wanted
Topic: Wanted: parts catalogue to cover 1973 PI
Replies: 4
Views: 1430

Re: Wanted: parts catalogue to cover 1973 PI

Hi Jim

I might have one spare for you. I will check tomorrow.

Lee
by leesellars
Sun Feb 08, 2015 8:59 pm
Forum: Parts for Sale and Wanted
Topic: Wanted: parts catalogue to cover 1973 PI
Replies: 4
Views: 1430

Re: Wanted: parts catalogue to cover 1973 PI

Hi Jim

I might have one spare for you. I will check tomorrow.

Lee