Search found 335 matches

by johnconradlee
Tue Jul 17, 2018 8:18 am
Forum: Engine
Topic: Anti-siphon valve?
Replies: 4
Views: 62

Re: Anti-siphon valve?

The easiest way I've fount to drain the tank is to break the fuel line at the rubber hose where it appears at the end of the gearbox tunnel, quickly (before you get too much fuel on the drive!) connect a length of rubber hose out under the car to a jerry can by the front wheel. That way it's all don...
by johnconradlee
Tue Jul 17, 2018 7:44 am
Forum: Body and Trim
Topic: mk1 front wing sections remanufacture
Replies: 33
Views: 4340

Re: mk1 front wing sections remanufacture

Lloyd has also had a website set up https://southwalestriumphs.com/ which has prices and ordering information.
by johnconradlee
Fri Jun 29, 2018 11:16 am
Forum: Body and Trim
Topic: Scabby wheel arches
Replies: 9
Views: 314

Re: Scabby wheel arches

There is a way to gauge the integrity of the sill structure, jack the car up under the end of each sill and try opening/closing the doors. If all is well the doors will open/close properly. Whether the car's owner will be willing to permit this is also a way of telling....... Yes I suppose that's a...
by johnconradlee
Fri Jun 29, 2018 9:16 am
Forum: Body and Trim
Topic: Scabby wheel arches
Replies: 9
Views: 314

Re: Scabby wheel arches

Hi John, It's a bit quiet on the forum this week as most people are at the national in Paignton. (I'm not as my car is still in bits!) With the arches I suppose to a certain extent it depends how bad the scabbiness actually is and whether you have the equipment to do it yourself. All that get used c...
by johnconradlee
Tue Jun 19, 2018 8:12 am
Forum: Body and Trim
Topic: Protective tape removal from NOS bumpers
Replies: 9
Views: 362

Re: Protective tape removal from NOS bumpers

According to the website Lidl will have the good thinners in from Sunday 24th.
https://www.lidl.co.uk/en/Non-Food-Offe ... 699&week=2
by johnconradlee
Fri May 11, 2018 12:49 pm
Forum: Parts for Sale and Wanted
Topic: Mk2 Estate Hubs & Diff, panels- Wanted
Replies: 7
Views: 371

Re: Mk2 Estate Hubs & Diff, panels- Wanted

The Stag diff mounts the same way as the Mk1 and estate (i.e with the steel bracket on the back) and the diff casing is a smidge larger to accommodate a slightly larger crown wheel and pinion (but this makes no difference in terms of fitting). All Stag diffs are 3.7:1. The Stag prop shaft input flan...
by johnconradlee
Fri Apr 20, 2018 11:53 am
Forum: Body and Trim
Topic: Dashboard removal and re-covering
Replies: 14
Views: 731

Re: Dashboard removal and re-covering

Taking the dash out on a Mk2 is indeed surprisingly easy (unlike Mk1 where it's welded in!). Remove the various bits attached to the dashboard that will get in the way (wooden bits, centre console, heater ducts etc) them then it just unbolts. Think having the dash recovered has been done (can't thin...
by johnconradlee
Tue Apr 17, 2018 8:07 am
Forum: General Discussion
Topic: Service notes & website question
Replies: 4
Views: 345

Re: Service notes & website question

The service notes are available in both paper and electronic format (CD Rom) via Malcolm and Jan Stewart - "regalia at triumph2000register dot co dot uk". There is a members area on the forum (not that there's much on there at the moment) you need to get an admin to change upgrade you. There is a fo...
by johnconradlee
Tue Mar 20, 2018 3:32 pm
Forum: Parts for Sale and Wanted
Topic: Mk1 parts wanted
Replies: 10
Views: 1011

Re: Mk1 parts wanted

Chris Witor appears to have one as part of a complete nose cone assembly:
https://www.chriswitor.com/proddetail.php?prod=570197
by johnconradlee
Wed Mar 14, 2018 11:59 am
Forum: Parts for Sale and Wanted
Topic: Mk1 parts wanted
Replies: 10
Views: 1011

Re: Mk1 parts wanted

If you look in the other post his Mk1 is a "C" reg pre-facelift.
Looking it up on the DVLA site it was registered March '65 so probably the early type.