Search found 21 matches

by Joe™
Sun Sep 30, 2018 8:25 am
Forum: Engine
Topic: 123 ignition
Replies: 8
Views: 405

Re: 123 ignition

Hello Joe, thanks for that chart, but to me, none of those settings is close to the original. I know many people are happy with this system but generally they are fitted to replace a totally worn out distributopr which may or may not even be the correct one for the car? it's not surprixing that the...
by Joe™
Sun Sep 30, 2018 3:35 am
Forum: Engine
Topic: 123 ignition
Replies: 8
Views: 405

Re: 123 ignition

The 123 does have a vacuum advance funcition.

Here is the chart of the curves on the standard (non-customisable) unit:

Image

As Alec said it does depend on your engine, but if it helps I run an earlier Mk2 PI engine with HS6s and have mine set on 'B'.
by Joe™
Thu Sep 27, 2018 11:50 am
Forum: Electrical Systems
Topic: Electronic Distributor
Replies: 5
Views: 367

Re: Electronic Distributor

I'm very happy with my 123ignition electronic dizzy - https://www.123ignitionshop.com
by Joe™
Sun Sep 02, 2018 11:37 am
Forum: Engine
Topic: Electronic ignition
Replies: 8
Views: 621

Re: Electronic ignition

I previously had a Petronix unit which was fine, but have since switched to a 123ignition electronic distributor - https://www.123ignitionshop.com/ - which is noticeable smoother, and I like having the option of adjusting the advance. I have the standard Tune but you can also get the Tune+ if you wa...
by Joe™
Mon Apr 23, 2018 12:36 am
Forum: Body and Trim
Topic: Dashboard removal and re-covering
Replies: 14
Views: 1532

Re: Dashboard removal and re-covering

I can give you the number for my guy here in Perth who may have one (no guarantees though). I would have thought for the cost and trouble of getting it shipped having your current one re-trimmed would work out about the same, it's not an overly hard job so any trimmer worth their salt shouldn't have...
by Joe™
Mon Jan 01, 2018 9:36 am
Forum: Steering, Suspension, Braking, Wheels & Tyres
Topic: Anti Roll Bar
Replies: 3
Views: 1067

Re: Anti Roll Bar

I recently fitted the ARB setup to the front of my '77 TC and thought it made a big difference in reducing body roll. I also have Witor's fast road springs installed, and the whole setup is poly bushed.
by Joe™
Thu Nov 23, 2017 12:52 am
Forum: Engine
Topic: Roller Rockers
Replies: 1
Views: 799

Roller Rockers

Hi everyone,

I am interested to hear what the general consensus is in regards to roller rockers - are they a worthwhile upgrade?

I have done some homework and found some voices online stating they are a waste of money, while others recommend them as increasing both power and smoothness.
by Joe™
Mon Nov 13, 2017 12:46 am
Forum: Engine
Topic: 123 Ignition distributor
Replies: 13
Views: 2387

Re: 123 Ignition distributor

Just to update everyone on this, I have fitted the 123 and am currently running it on setting 'B', which is a max mechanical advance of 23 degrees at 4500 and 12 degrees of vac advance. As the car is an auto it rarely sees above 3k through regular driving. The 123 has smoothed out the running of the...
by Joe™
Sun Oct 29, 2017 12:31 pm
Forum: Engine
Topic: 123 Ignition distributor
Replies: 13
Views: 2387

Re: 123 Ignition distributor

Joe, I have a non- programmable 123 dizzy fitted to my car which is a 2500S injected, and can honestly say it's the best modification that I've done - it has 16 settings and once you get it right it completely smooths out the running. I think mine was set on either 1 or 2 - but if you're a Register...
by Joe™
Tue Oct 24, 2017 11:54 am
Forum: General Triumph 2000 Discussion
Topic: Hand built racer
Replies: 1
Views: 792

Hand built racer

Not sure if this will be of interest to anyone bar myself, but thought I'd share some quick snaps of a car local to me. Chap who owns it is 73 and did pretty much all the work himself. It hasn't run in a few years, but has a fully worked over 2.5 PI motor, 200bhp was the number thrown out. Heavily l...